Check Engine Light Diagnostic Tool - WiFi OBD 2 Scanner for iOS & Android

  • $24.95
  • Save $5
Shipping calculated at checkout.

    • Read and clear your Check Engine Light and all other vehicle systems. 
    • As easy to use as a code reader with all the capabilities of an expensive handheld scan tool, plus the benefits of your smartphone or tablet (free app updates, portability, saving data, interactive graphing of live data)
    • For Apple and Android devices
  • Compatible Car Model:  This OBD2 Scanner works on ALL vehicles After 1996!
  • Effective & Functional; Car Diagnostic Scanner Foseal Wireless OBD2 Scan Tool (a) helping to diagnose your car for any issues to avoid repair bill or high diagnostics fee & (b) reading important information that you can get from your cars ECU, and clearing error codes to keep your car in perfect condition.
  • Better Compatibility; Foseal OBD2 Scanner iOS compatible (iPhone iPad), Android compatible (Android phone, Android Tablets, such as Samsung LG etc.), Also PC compatible (Hook up to your laptop to this device via WIFI), unlike other Bluetooth OBD2 Scanners.
  • Easy to Use; (1) Download a popular free or paid APP suitable for your phone or tablet (recommend "inCarDoc" and "OBD Fusion" ($9.9) for iOS. Recommend "Torque lite"/"Torque Pro" and "DashCommand" for Android), (2) Find the OBD port in your car(usually under dashboard on driver side) and plug in, (3) Turn your car power on, (4) Go to your phone/tablet wifi setting and connect to WIFI_OBDII, Please wait for WIFI connection - it will be ready in about 10 seconds, then click Ready to diagnose your car and read/clear codes.


Connection: WiFi (in adHoc mode)
LED Indicator: Power, RS232 TX/RX, OBD, WiFi
Working Voltage: 12V (with short-circuit and over-voltage protections)
Output Protocol: RS232 serial port
Baud Rate: 38400
Item Type:Code Readers & Scan Tools Special
Version:OBD2 (OBD II) Software, ELM327 V1.5 For Android and IOS

LED Indicator Instructions:

1. After powering on, the five indicators (from left to right: red, yellow, green, yellow, green) flashes once to let you know whether they work normally.
2. Only the red indicator lights up constantly in the whole process until you exit the APP (eg. Torque).
3. Open the APP again, the red indicator glows constantly. 3s later, the yellow and green indicators flash. Another 2s later, all the left 4 indicators flash quickly when there is data transmission.
4. After disconnecting the WIFI or exiting from the APP, only the red indicator lights up.

Supports  OBD-II protocol:

1) ISO9141-2 (5 baud init, 10.4 Kbaud)
2) ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
3) ISO14230-4 KWP (fast init, 10.4 Kbaud)
4) ISO15765-4 CAN (11bit ID, 500 Kbaud)
5) ISO15765-4 CAN (29bit ID, 500 Kbaud)
6) ISO15765-4 CAN (11bit ID, 250 Kbaud)
7)ISO15765-4 CAN (29bit ID, 250 Kbaud)
8)SAE J1939 CAN (29bit ID, 250 * Kbaud)
9)USER1 CAN (11 * bit ID, 125 * Kbaud)
10)USER2 CAN (11 * bit ID, 50 * kbaud)


Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database). With proper software installed in the host device, you may have following parameters read out from your vehicle:
  1. Clear trouble codes and turn off the MIL ("Check Engine" light)
  2. Display current sensor data, including:
  3. Engine RPM
  4. Calculated Load Value
  5. Coolant Temperature
  6. Fuel System Status
  7. Vehicle Speed
  8. Short Term Fuel Trim
  9. Long Term Fuel Trim
  10. Intake Manifold Pressure
  11. Timing Advance
  12. Intake Air Temperature
  13. Air Flow Rate
  14. Absolute Throttle Position
  15. Oxygen sensor voltages / associated short term fuel trims
  16. Fuel System status
  17. Fuel Pressure
  • The Scan Tool is able to detect and interpret these protocols automatically.
  • It also provides support for high speed communications and a low power sleep mode.
  • It uses AT commands to communicate with a host device.
  • There are plenty of software packages available, which are fully compatible with The Scan Tool. Some of them have pretty useful features, such as engine running parameters monitoring, DTC reading and clearing, MPG meter, etc.
  • You can even write your own software on a specified hardware platform , because the AT commands are fully documented and very well explained.
  • The Scan Tool measures only 2.7 x 1.25x 0.9 inches, and it comes with a 6 ft OBDII cable for easy installation.
  • It also comes with a power switch built-in to prevent the need for having to constantly disconnect your unit from the OBDII port.


We Also Recommend